DiveLink Belt Pack Underwater Communicator

DiveLink Diver Underwater Communication Belt Pack

Features:

• Voice activated or Push-To-Talk
• Internal Battery Pack Energy Management System disconnects charger when fully charged
• “Gas Gauge” display shows charge state
• Transducer may be unplugged to access charge port TECHNICAL SPECIFICATIONS

Custom integrated circuits and digital signal processing are employed to ensure intelligibility and lowest power consumption, lowest noise figure, and automatic signal processing that correctly matches the underwater acoustic environment.

All controls may be adjusted easily underwater by the diver:

Belt Pack Suggested Channel Lineups:

• 2AF Two Separate Channels
• 3AFI Three Separate Channels
• 8 may also be ordered for 8 channels, to allow compatibility with other manufacturer’s equipment.

If you are ordering the Belt Pack for use under water then you will need to order two more parts.

1. The first is called model EAR-MIC which provides the diver with earphones, a push-to-talk switch, a voice activation lock down lever, and a volume control.
2. The second is a separate microphone model MPC-xxx to fit properly into the full face mask the diver is wearing.

Each of these parts is necessary but may also be ordered as spare parts or to allow several divers to have their own microphone for different masks or for sanitary reasons...

EAR-MIC requires Microphone MPC-xxx for Full Face Mask Type:

• All connectors are GOLD PLATED for maximum corrosion protection.

MPC-AGA to match Interspiro AGA Divator

MPC-DRAGER to match Drager Full Face Mask

MPC-EXO to match Kirby Morgan EXO Full Face Mask

MPC-KM48 to match Kirby Morgan Super Mask

M48 MPC-MANTIS to match Mantis Full Face Mask

MPC-POSIEDON to match Posiedon Full Face Mask

MPC-REEF to match Ocean Reef Neptune Nira Full Face Mask

MPC-SCUBAPRO to match Scubapro Full Face Mask

If you are ordering the Belt Pack for use on the surface or in a dry submarine then you will need to order two more parts.

The first is called model EAR-MIC-S which provides the person wearing the belt pack with headphones, a push-to-talk switch, MIC-S01 boom microphone and a volume control.

The second is a separate transducer and cable model XDR-S08-S to connect the belt pack to a means to broadcast into the water and receive signals from divers in the water. Each of these parts is necessary but may also be ordered as spare parts.

The DIVELINK Surface Conversion Kit adapts the Diver Communicator Pack COM-UC for use as a SURFACE UNIT.

Kit includes:

XDR-S08-S Surface Transducer Extension

• 10 Meters / 33 feet
• Comes with Transducer
• Allows transducer to extend into the water

EAR-MIC-S Surface Unit

• Waterproof Connector to belt pack
• Push To Talk button on ear cup
• Detachable Noise Canceling Microphone on Boom (MIC-S01)
• Volume Control